AMS 4928W Titanium
AMS 4928W Titanyum
Sourced upon request
- AMS4928W
- AlaşımTi-6Al-4V
- UNSR56400
Move Metal sources titanium Grade 5 material according to AMS 4928W and related technical requirements, subject to availability and supplier confirmation. AMS 4928 is the aerospace specification for Ti-6Al-4V bars, wire, forgings and rings in the annealed condition; it differs from other specifications with similar chemistry (e.g. AMS 4965, ASTM B348) in testing, heat-treatment and certification requirements.
01Before Requesting a Quote, Please Provide
- Diameter / dimensions
- Cut length
- Quantity
- Required condition
- Testing requirements (e.g. AMS 2631 ultrasonic)
- Certification (3.1, CoC, DFARS …)
- Origin requirements
- Delivery location
02Specification Matters
- AMS 4928 and AMS 4965 define the same alloy under different conditions; equivalency must be confirmed against the applicable specification.
- The revision letter (W) should be stated for supplier confirmation.
03Heat Treatment
Typical values
- Stress relieving
- 480–650 °C, 1–4 h; air cool
- Annealing
- 700–790 °C, 1–4 h; air/furnace cool
- Solution treatment
- 900–955 °C, 1 h; water quench
- Ageing
- 480–595 °C, 4–8 h; air cool
- After STA
- ≈ 36–41 HRC; Rm ≈ 1100–1200 MPa
- Hardenability
- Full up to ≈ 25 mm section
- Delivery condition
- Annealed (AMS 4928)
Heat treatment cycle (schematic)
Ageing diagram (approximate)
Values are approximate and for information only; they vary with section size, heat and furnace conditions. Binding values are determined from the manufacturer’s data under laboratory conditions.
Have a material requirement?
Send us your specification, drawing or RFQ. Our team will review the requirement and identify a suitable supply option.